Panel Replacement is one part of our garage door repair coverage in Conway, SC. For the full picture — symptoms, costs, and when to repair vs. replace — start with the complete Garage Door Repair guide, or browse every garage door repair service we offer.
Conway's panel replacement jobs land on our schedule daily. The housing here is mainly suburban houses with attached two-car garages, mixed with some older central-neighborhood homes, and we size every fix to match it rather than forcing a one-size part.
What wears out a Conway door isn't just use — it's the weather. Hot, humid summers and short, mild winters, with frequent storms and moisture that lingers in the air most of the year drives frequent thunderstorms that drive rain into tracks and seals, storm-season wind that stresses panels and bottom seals, and intense UV that degrades rubber weatherstripping, and we plan for all of it.
Garage doors in Conway tend to fail in predictable ways — corroded springs and cables in the humid air, degraded weatherstripping from UV and moisture, rusted track hardware and seized rollers, and swollen, sticking wood doors in summer humidity. Catching them early during a tune-up usually costs a fraction of an emergency call.
Panel replacement saves homeowners thousands compared to a full door replacement when only one or two sections are damaged. A car backing into the bottom section, a kid's basketball hitting a center panel, or rust creeping along the bottom edge are all repairable without scrapping the rest of the door — if you have the right vendor relationships. We carry stock panels from Clopay, Amarr, Wayne Dalton, CHI, and Raynor, and we color-match the profile and finish so the replacement panel is invisible against the rest of the door.
We will tell you honestly when a panel replacement is the wrong choice. If three or more sections are damaged, if the door is more than 20 years old, or if the door is a discontinued model where replacement panels aren't manufactured anymore, full door replacement is usually the better economic decision. Our techs photograph the damage, measure the door, and price both options so you can choose with full information.
Every panel replacement includes hinge replacement at the new section, a roller inspection, and a balance test once the door is reassembled. Insulated panels (R-8, R-12, R-18) cost slightly more than non-insulated and are a great upgrade opportunity for homeowners with attached garages.
A backed-into bottom section or a basketball dent in a center section is a cosmetic issue that can pull double duty as a structural one if it's deep enough to bend the panel's frame.
Rust streaking from the bottom edge
Coastal homes see bottom-section rust progress upward into the panel skin. Once rust pierces the skin, the panel cannot be refinished and needs replacement.
Cracked or warped wood section
Wood doors suffer water damage and warping that won't reverse with refinishing. Replacing the affected section is faster and cheaper than re-veneering.
Mismatched panel from prior repair
Prior repairs that used an unmatched panel make the door look patched. Replacement with the correct profile and color restores curb appeal.
Insulation upgrade desired
Replacing center panels with R-12 or R-18 insulated panels is an inexpensive way to improve thermal performance on attached garages without replacing the whole door.
Common causes & what we fix
Vehicle impact
Backing into the bottom section is the single most common cause of panel damage we see. The bottom edge takes the hit and the panel buckles inward.
Coastal corrosion
Salt-air pitting on uncoated steel panels progresses over years until rust breaks the painted skin. Repainting only delays it; replacement with hot-dipped galvanized panels stops it.
Hail or wind-blown debris
Hail dents are usually a series of small dimples across one section. Wind-blown branches leave linear creases. Both are good candidates for single-panel replacement.
Hinge or roller failure
A failed hinge can cause the door to twist as it travels, bending the section at the connection points. Repairing the panel without addressing the hinge guarantees a repeat.
Settling foundation
Door frames that have shifted with the foundation force the door panels into a slight twist. The lowest section takes the most stress and is often the first to crack.
Our process
1
Call or schedule online. Schedule panel replacement on a 2-hour window that suits you. Within five minutes you'll get a confirmation carrying the name and photo of the tech we're sending.
2
On-site diagnosis. On-site, we pinpoint the panel replacement fault and show it to you. Diagnosis is free for most repairs and $39 for minor service calls — waived the moment you proceed.
3
Flat-rate quote. You approve a flat-rate, written panel replacement quote first. No hourly creep, no pressure — our salaried (not commissioned) techs have no reason to oversell.
4
Same-visit fix. Nine times in ten — 96%, really — the panel replacement is done in one visit. You watch the final test cycle, and we haul off every old part and bit of debris.
How much does panel replacement cost in Conway, SC?
Budgeting panel replacement in Conway? Pricing opens at $279, flat-rate and in writing first. We quote both repair and replacement when it's a close call, so you can pick on cost with the full picture in front of you. Pricing panel replacement cost in Conway, SC? The quote is flat-rate and in writing before any work begins — no hourly creep.
Panel Replacement the United States starts at from $279, and your panel replacement quote in Conway is flat-rate, in writing, and final before any work — no add-ons, no creeping hourly charges. Senior (65+) and military customers get 10% off labor, and Synchrony funds projects above $1,500 at 0% APR for a year with no prepayment penalty.
Why homeowners in Conway, SC choose us for panel replacement
We earn Conway's panel replacement business the slow way: honest scope, parts that last in South Carolina's humid subtropical region, and a crew you can reach any day of the week. CSLB #1098234, insured and bonded, with a 96% same-visit fix rate. For professional panel replacement in Conway, SC, Conway homeowners reach a salaried, background-checked crew, never a call center.
Panel replacement is guaranteed ten years on our workmanship — a promise that sits apart from the manufacturer's parts coverage. If the panel replacement we performed fails because of our install, the fix is free for the full decade. 30,000-cycle springs are lifetime-warrantied for the original homeowner, and parts and accessories run 1–5 years.
The two rules behind every panel replacement quote: don't sell work that isn't needed, and show the customer everything. Our salaried techs have no commission incentive, the diagnostic is fully transparent, and we call repair-versus-replace on the long-term math, not the bigger ticket. Your flat-rate panel replacement quote is written and good for 30 days.
Areas we serve for panel replacement
We provide panel replacement throughout Conway, SC and the surrounding Horry County area. Serving Pinewood, Buckwood, Park Hill and surrounding neighborhoods.
Need more than panel replacement? Our Conway, SC garage door company page is the local hub for every repair, install, and opener job we handle across Conway — start there for the full service lineup.
Where you are matters for panel replacement: Conway is one of the communities of Horry County, South Carolina. That's the region our Conway techs cover every day.
Beyond Conway proper, our panel replacement reaches nearby Homewood, Red Hill, Carolina Forest, and Forestbrook — same crews, same turnaround, same flat-rate pricing. We handle panel replacement around 29527 and the rest of Conway, SC on one daily route.
Panel Replacement near you in Conway, SC
For Conway homeowners who searched panel replacement near me, the advantage of going local is simple: faster arrival, a tech who knows South Carolina's humid subtropical region, and someone you can reach again if you ever need to.
Conway is part of our greater Myrtle Beach, SC metro service area.
We service ZIP codes 29527, 29526, 29528 and everything around them. Because Conway traffic moves panel replacement response times around, we quote your ETA live on the call rather than guessing. Our dispatch number connects to an on-call tech with no voicemail in the way. For local panel replacement in Conway, SC, including 29527, we route the nearest stocked truck straight to your door.
Frequently asked about panel replacement
Top questions homeowners searching for Panel Replacement near me ask us:
We cover Pinewood, Buckwood, Park Hill and Greenbriar — including ZIPs 29527, 29526, 29528. If you are anywhere in Conway, you are in our service area — call (213) 221-2882 and we will confirm the next available window.
The median Conway home dates to 1991, with 37% of the stock built before 1980 — a real mix of original and already-replaced doors, which is why we quote repair-versus-replace honestly on every call.
For one or two damaged sections, yes — single-panel replacement is typically 30–50% of full-door cost. Past three sections, replacement starts to make economic sense.
The new panel comes with the manufacturer's standard panel coverage (typically 3–10 years depending on brand). The existing panels retain their original coverage terms.
Stock panels (Clopay Premium, Amarr Heritage) ship from regional distribution in 2–5 business days. Special-order panels (full-view, custom carbon, wood) take 2–4 weeks.
For stock factory colors (almond, white, sandstone, brown, terratone), yes — we order the exact factory finish. For custom paint jobs or aged finishes, the replacement panel can be field-painted to match.